I'm putting a FXR rear wheel on my FLSTC. Is the FXR pulley 70Tooth??I'm thinking that I can mount a tire on it and change spacers with the wheel on the bike now. Its got the pulley and rotor on it .Will it work??
TIA
i am certian that by adjusting the spacers that the change will work, as for the number of teeth......i would have to count them....let us know how it works!!!.....
__________________
LORD, HAVE MERCY ON AMERICA, WHILE WE ARE UNDER DISTRESS
"FLAGS AND HANDLEBARS SHOULD NEVER TOUCH THE GROUND"
"Lord, hold our troops in your loving hands. Protect them as they protect us. Bless them and their families for the selfless acts they perform for us in our time of need. Amen."
We plan to meet next week to talk about planning a strategy session to discuss the next step towards forming a consensus to start the development of the rough draft for the implementation of our intention to develop a plan.
Before You Count You Might Be Able To Take That Soft Sewing Kit Tape And Measure Around, Could Work, I Would Imagin If It Has More Or Less Grooves That The Pully Will Have A Differn't Od.
Interests: Bikes wrenchin And ridin with friends and making new friends
Occupation: Rail Road
Rear FXR Wheel on a Softail
Should work make sure the sprockett and the belt match same width they varied thru the years 1 1/2"'s 1 1/4"'s ect, make sure the wheel is centered and lined useing your exsisting spacer's should center it. But check it. if going from 65 tooth to 70 tooth you sould have enough belt? you might want to check that issue out.........Have fun, good luck! ...strickt9Rob.
__________________ [/SIGPIC]strickt9Rob
Last edited by strickt9Rob; May 17th, 2008 at 09:57 PM.
We plan to meet next week to talk about planning a strategy session to discuss the next step towards forming a consensus to start the development of the rough draft for the implementation of our intention to develop a plan. 
CFL 
