[us019447]

I plan on replacing my Deuce handlebars with Kuryakyn's Brawny Low Rise Knuckle Bar(DP P/N KA1704), end rise = 2", width =36.5", pullback = 0.5.
Has anyone used these bars on the Deuce? Will I need to lengthen my wiring, brake line, and clutch cable? The clutch cable looks plenty long enough, but not sure about everything else.
Thanks!

[hotroadking]

I haven't but you could check with kuryakyn at thier web site about that.

I ran Carlini Drags 9 inch pull back on a softail and the stock cables were fine, I had to add some to the wires to make them work on pulling them through.