1. After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
  2. Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.

    There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.
Bike Talk Motorcycle Forum is For Sale Welcome to Bike Talk

Installing EZ-screw with carb still on bike

Discussion in 'EZ-Just Idle Mixture Screw' started by swampdragon, Oct 15, 2008.

  1. swampdragon

    swampdragon New Member

    Joined:
    May 23, 2008
    Messages:
    46
    Likes Received:
    0
    I recently rebuilt my carb with your kit.
    I SHOULD HAVE GOT THE EZ-screw ALSO!
    My bike is an 01 Sporty with the cross-over in the exhaust. Talk about a PITA to get a screw driver up in there to the carb with the cross-over in the way.

    Do I have to pull my carb all the way off again to install this screw?
    swampdragon, Oct 15, 2008
    #1
  3. fxdxriderleo

    fxdxriderleo Active Member

    Joined:
    Sep 16, 2007
    Messages:
    291
    Likes Received:
    0
    Location:
    Earlville, NY
    howdy, i don,t know if you got the ez just screw in yet . you can change it with out removing carb,but you have to be careful, you don't want to lose the spring,washer and oring that goes up in there.
    fxdxriderleo, Oct 24, 2008
    #2

Share This Page

XenPorta © Jason Axelrod from 8WAYRUN.COM