1. After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
  2. Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.

    There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.

Spring

Discussion in 'CV Performance' started by baggerpaul, Jun 28, 2012.

  1. baggerpaul

    baggerpaul Well-Known Member

    Joined:
    Aug 8, 2011
    Messages:
    2,670
    Likes Received:
    108
    Location:
    south fl.
    hey ken have one of your kits in a cv 40 runs great no problems . but have a question on the spring for the slide . what gram spec is the spring . i have a 44 cv that is on the new build jetting seems to be good but i feel the stock spring in the 44 is kinda tight takes a bit when i wack the throttle for it to come in . they have a lighter spring in there tunners kit but dont service it as just one unit you must by the kit . if the spring that you offer falls in between the gram spec of the two . i would like to try it and see if it does what i want . thanks in advance:D
  2. hotroadking

    hotroadking Super Moderator Staff Member

    Joined:
    Jun 16, 2004
    Messages:
    13,682
    Likes Received:
    584
    Location:
    Mouseville USA
    just put the fugger in it and see wtf happens,

    it will either work or,
    it won't. IE the slide will hunt vs maintain position...

Share This Page