1. After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
  2. Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.

    There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.
Bike Talk Motorcycle Forum is For Sale Welcome to Bike Talk

1996 Road King Fuel Injected

Discussion in 'Motorcycle Tech Talk' started by Besthelper, Aug 12, 2008.

  1. Besthelper

    Besthelper New Member

    Joined:
    Aug 2, 2008
    Messages:
    11
    Likes Received:
    0
    I am considering fitting a POWER COMMANDER in an attempt to rectify a fuel problem.
    The bike runs perfectly on a trip,but the plugs "carbon up " when used around the city.
    The bike is fitted with a Magnetti Morelli system which cannot be adjusted.
    Any one had experience with the POWER COMMANDER ?
    Will this equipment assist the above condition ?
    Regards Besthelper
    Besthelper, Aug 12, 2008
    #1
  3. cowboy

    cowboy Moderator Staff Member

    Joined:
    Apr 19, 2006
    Messages:
    9,926
    Likes Received:
    50
    Location:
    Alvin TX
    I run the PC 111 & it work's real good ,but I have A 03 E Glide , & it has a different EFI unit
    cowboy, Aug 12, 2008
    #2
  4. VYBR8ER

    VYBR8ER New Member

    Joined:
    Apr 5, 2007
    Messages:
    257
    Likes Received:
    0
    Location:
    Central Valley, CA
    I just happen to have a 96 Road King with EFI. In order to program the 96 you MUST buy a 98 ECM which is programmable. Once you have the programmable ECM and a fairly close download, the PCIII will allow you to tune it for just about any modification you set your heart on! Mine runs a stock crank with .010 over Keith Black flat top pistons, Andrews EV27 cam, SE heads that have been shaved .030 to get 9.8:1 compression and a V&H propipe. I'm getting 82 HP/87 FtLbs torque and it doesn't ping on hot days.
    VYBR8ER, Aug 12, 2008
    #3

Share This Page

XenPorta © Jason Axelrod from 8WAYRUN.COM