1. After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
  2. Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.

    There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.
Bike Talk Motorcycle Forum is For Sale Welcome to Bike Talk

96" Big bore

Discussion in 'Motorcycle Tech Talk' started by junior68, Jan 22, 2011.

  1. junior68

    junior68 New Member

    Joined:
    Jan 22, 2011
    Messages:
    1
    Likes Received:
    0
    Location:
    Mpls.,MN.
    I have a '09 Road king, What is the max C.I. without boring the cases?
    junior68, Jan 22, 2011
    #1
  3. FLHTbiker

    FLHTbiker Moderator Staff Member

    Joined:
    Nov 3, 2004
    Messages:
    18,516
    Likes Received:
    252
    Location:
    Oregon
    I believe it is a 103 for a standard upgrade size, not sure on boring any larger but I'm sure other will chime in here for additional input.

    Sent via IPhone
    FLHTbiker, Jan 22, 2011
    #2
  4. hotroadking

    hotroadking Super Moderator Staff Member

    Joined:
    Jun 16, 2004
    Messages:
    13,682
    Likes Received:
    584
    Location:
    Mouseville USA
    107. Zippers or 106. S&s. Kits drop right in. Cyl and piston kit


    Sent from my iPhone using Tapatalk
    hotroadking, Jan 22, 2011
    #3
  5. cardboard

    cardboard Well-Known Member

    Joined:
    Nov 12, 2007
    Messages:
    11,459
    Likes Received:
    56
    Location:
    Lake Livingston, Tx.
    Hotroadking is right.
    107 is the way to go.
    It will give you the most power you could ever want.
    But I would looks at Fulsac performance.
    cardboard, Jan 22, 2011
    #4
  6. cardboard

    cardboard Well-Known Member

    Joined:
    Nov 12, 2007
    Messages:
    11,459
    Likes Received:
    56
    Location:
    Lake Livingston, Tx.
    Fullsac Performance - '09 96" Stage III Sleeper Kit - Lake Havasu City, AZ

    2009-2011 96" Touring Bikes
    Stage III - Sleeper Kit - 107"

    The ultimate Sleeper. Stock looks with well over 100 HP at the back wheel!

    Combine our stage I and II kits with a 107" BIG Bore piston kit and you have just acquired membership into the 100 HP club.

    Very civilized Touring manors with an amazing torque curve and top end pull, all with stock cylinder heads. Without a doubt, Harleys 09 cylinder heads are some of the best castings they have ever produced. Forged CP pistons install into your stock cylinders after ordinary cylinder boring bringing your 96 to a 107" power house. Nothing exotic, all parts assemble like stock. And as always, a Precise Fullsac TTS fuel map is included making this a true "plug and Play" experience.
    cardboard, Jan 22, 2011
    #5
  7. hotroadking

    hotroadking Super Moderator Staff Member

    Joined:
    Jun 16, 2004
    Messages:
    13,682
    Likes Received:
    584
    Location:
    Mouseville USA
    I did SMS 106. Great USA made product and service. Fit was spot on

    106 or 107. No real difference


    Sent from my iPhone using Tapatalk
    hotroadking, Jan 22, 2011
    #6
  8. cardboard

    cardboard Well-Known Member

    Joined:
    Nov 12, 2007
    Messages:
    11,459
    Likes Received:
    56
    Location:
    Lake Livingston, Tx.
    Hmmmmmmmmmmmmm

    Wonder where Fulsac performance is.

    Bet they are from right here. And they are some of the original folks doing this. Check out more about them. They were the ones doing the Video with the bike doing a wheelie. That's how good their kits are.

    [​IMG]
    cardboard, Jan 22, 2011
    #7
  9. cardboard

    cardboard Well-Known Member

    Joined:
    Nov 12, 2007
    Messages:
    11,459
    Likes Received:
    56
    Location:
    Lake Livingston, Tx.
    cardboard, Jan 22, 2011
    #8
  10. cardboard

    cardboard Well-Known Member

    Joined:
    Nov 12, 2007
    Messages:
    11,459
    Likes Received:
    56
    Location:
    Lake Livingston, Tx.
    Do you remember this video from years ago.
    Well back then it was Fulsac performance that was building the kits for the bikes. And they are still doing it.
    Fulsac performance has been around for a while.
    Its just nobody hears about them.

    YouTube - Fullsac Performance 107" Tandem Wheelie!
    cardboard, Jan 22, 2011
    #9
  11. hotroadking

    hotroadking Super Moderator Staff Member

    Joined:
    Jun 16, 2004
    Messages:
    13,682
    Likes Received:
    584
    Location:
    Mouseville USA
    DIdn't say they were not USA

    Seeing you are so proud of Fullsac when will you be bumping up the new bike
    with the Fulsac kit to 107? LOL


    Just that SNS is, and has over 60 years building
    high performance bike parts

    I stick with their products because
    they are good, service is good,
    parts are high quality, they are USA made
    and they have the money to be in business
    for a long time, started by good ol
    boys in Wisconsin
    hotroadking, Jan 23, 2011
    #10

Share This Page

XenPorta © Jason Axelrod from 8WAYRUN.COM