1. After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
  2. Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.

    There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.

A couple Of Things

Discussion in 'Motorcycle Tech Talk' started by coyote1962, Jun 28, 2009.

  1. coyote1962

    coyote1962 New Member

    Joined:
    Jun 28, 2009
    Messages:
    2
    Likes Received:
    0
    Location:
    Florida
    Just got my Sabre a couple of weeks ago and love the power.I do have a couple of questions if anyone can help me with.There is some backfire when I roll off the gas.Sounds cool but the neighbors may get tired of it at 5 AM :D
    Been told it is no big deal but now I think my MPG is suffering. Any thoughts?
    Also I believe my bike has the CA emissions set up.Had I known,might not have gotten the bike but any how.......Can I safe and with little head ache change the set up to the Canada/49 state set up? Would appreciate any thoughts on either!
  2. chucktx

    chucktx Moderator Staff Member

    Joined:
    Jul 5, 2005
    Messages:
    12,545
    Likes Received:
    10
    the back fire may be from loose header gaskets or from where the pipes go together. loose exhaust clamps can cause this problem. as for the emissions problem, hope someone else can help ...........
  3. cowboy

    cowboy Moderator Staff Member

    Joined:
    Apr 19, 2006
    Messages:
    9,926
    Likes Received:
    50
    Location:
    Alvin TX
    Is your bike the 1100 model ? if so check ti see if the other guy pulled the tank off There's a lot of wires under it & some get knocked loose You have to just go through & double check the plugs to make sure there tight & double check the airbox it's two /three piese & might have a loose fitting

Share This Page