Bal tail light help

Anybody out there know where to place the magnet to set the pattern? I can't seem to find my instruction sheet or locate the instructions from their web site.

TY........Mike

Looking at the light upper left corner. Just touch and pull Away for an instant.

Standing behind the bike, mine is at the upper RIGHT corner.

Yes you are right. I was still asleep.

It's my job to watch lil' bro. Got yer back.

believe the upper right, been awhile though.

Had a girlfriend in that 3.9% once. She always said why wear underwear? Its just one more piece of clothing she had to wash. It was fun being with her when she wore a skirt, specially on windy days. :roflmao:

Nice story, think I'm missing something here tho.

just relating to your signature line I guess, ironhorse.

Ok I found a spot on the lens that seems to work when I briefly hold the magnet to it. I'm trying to find the 3 rapid flashes then steady on pattern, but don't seem to have much luck doing it. I have tried changing patterns both while the brake is applied and with brakes off and just ignition on. Which one is correct? I am afraid that riding around with the current pattern of 3 rapid pulses then 3 slow flashes is so obnoxiously bright, it may get me shot!

Aloha...Mike

To do the brake light function: Key on, Brake on, Tap the magnet against the lens. The function will change each time you tap the lens, I got mine set to rapid flashes then steady on. On Brightest setting, For running light: Key on, tap lens. Again I'm on brightest setting. P.S. I was rear-ended once so tough sheet if they don't like it.

It is on the upper right
And you set the intensity without the break on
You set the different flash's with the brake on
And you use the magnet with the red end toward the red lens




http://brightasslights.com/index_files/Page1023.htm

Thought I said that. Nevermind

Didn't know this was yer thread:gah:

Whatever :witsend:

oh helll missed that one

Sorry dude, don't see where you said never mind
Thought Sir Rat asked the question
I like most of the other reply's was responding too
Don't understand why you are git tin frustrated at me
I posted the technical data in case Sir Rat or whomever needed it .

Thanks CB

Thanks Charlie46

It took a little bit of playin with it but I found the pattern I wanted.....Thanks guys

Aloha....Mike