Cams

How virgin do you want to keep it.

Have you had the HD recall issues?

Here is a link to a discussion on cams for the 110 and some dyno charts

110 cam suggestions

Good choices for a bolt in cam swap with adjustable pushrods, no head work,
granted the bike will need to be tuned

Woods 5-6 lower power
Woods tw-7 mid range and upper
HD Dealers are putting in SE255 (lower) and SE263 mid range

There are a lot of cam choices. but these are good for what you want, bolt in more power..

BTW you will need to get it tuned I suggest you look at this software.


TTS Mastertune

They have plenty of base maps to get you close, then you run the Data acquisition application, which tunes the VE ratios of each cylinder

Then run Vtune which takes the data map you build while riding and merges with the AFR map you loaded. after several runs you've base tuned the bike.

Nothing beats a good base tune from a competent tuner, then build on it with Vtune but you can get it darn close yourself...

all good advise there seg....................