1. After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
  2. Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.

    There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.
Bike Talk Motorcycle Forum is For Sale Welcome to Bike Talk

Carb jetting

Discussion in 'Motorcycle Tech Talk' started by bouxy, Jan 18, 2010.

  1. bouxy

    bouxy New Member

    Joined:
    Jan 2, 2010
    Messages:
    8
    Likes Received:
    0
    i ordered a kit from this site with the ez-screw :(
    now im having 2nd thoughts about doing it myself.....

    i have changed pipes and high-flo found it fairly simple...

    are there others here who are fairly new at this who have jetted the carb
    succesfully ....

    bouxy:(:(:(:(
    bouxy, Jan 18, 2010
    #1
  3. cowboy

    cowboy Moderator Staff Member

    Joined:
    Apr 19, 2006
    Messages:
    9,926
    Likes Received:
    50
    Location:
    Alvin TX
    Just take your time & read all the instructions , It was many year since I did a carb & did a 04 883 carb It went real good YOU can do it & where here to help :cool:
    cowboy, Jan 18, 2010
    #2
  4. bouxy

    bouxy New Member

    Joined:
    Jan 2, 2010
    Messages:
    8
    Likes Received:
    0
    Thanks alot

    bouxy
    bouxy, Jan 18, 2010
    #3
  5. HarleysLR

    HarleysLR Active Member

    Joined:
    Jun 14, 2007
    Messages:
    2,113
    Likes Received:
    13
    Location:
    Colorado Springs, CO
    As cowboy said take your time, i know men don't read instructions, but if you do it will help a lot, just follow the instruction you received with the kit and you'll be fine.
    One hint, when you go to install the carb back into the manifold rub a small amount of light grease around the inside of the rubber boot, it will aid in getting the carb in place and will also help seal the fitting. Don’t forget to hook the voes line back up.
    HarleysLR, Jan 18, 2010
    #4
  6. chucktx

    chucktx Moderator Staff Member

    Joined:
    Jul 5, 2005
    Messages:
    12,545
    Likes Received:
    10
    yup, what they said!
    chucktx, Jan 18, 2010
    #5

Share This Page

XenPorta © Jason Axelrod from 8WAYRUN.COM