1. After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
  2. Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.

    There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.
Bike Talk Motorcycle Forum is For Sale Welcome to Bike Talk

Circuit breaker question

Discussion in 'Motorcycle Tech Talk' started by 410nut, Jul 28, 2012.

  1. 410nut

    410nut New Member

    Joined:
    Jul 28, 2012
    Messages:
    1
    Likes Received:
    0
    hello, i'm installing new voltage regulator and am not sure which side/post of the circuit breaker the main wire off it it needs to be on. one post has main power/batt wire to it, and the other side/post has the aux wire from my main wiring harness on it. so i'm not sure which side to hook the voltage regulator wire onto. someone else took wire off circuit breaker and he doesnt remember which side it came off.
    the bike is a 06 venom big bear with 100' s&s.
    any help would be greatly appreciated
    thanks
    410nut, Jul 28, 2012
    #1
  3. Lucifer

    Lucifer Well-Known Member

    Joined:
    Mar 20, 2008
    Messages:
    3,861
    Likes Received:
    102
    Location:
    Cape Breton NS,Canada
    The voltage regulator output(Yellow shrink tube) goes to the load side of circuit breaker(silver post) your main power/batt wire goes to the line side....the regulator ground wire(Black shrink tube) goes to ground...That's for a HD regulator.... if there's no color coding on the regulator wires,the ground wire terminal should be star shaped where it goes over the ground stud....hope that helps you:D
    Lucifer, Jul 29, 2012
    #2

Share This Page

XenPorta © Jason Axelrod from 8WAYRUN.COM