1. After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
  2. Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.

    There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.

FLHTi rear air shocks

Discussion in 'Motorcycle Tech Talk' started by 00 wildglide, Apr 13, 2008.

  1. 00 wildglide

    00 wildglide New Member

    Joined:
    Nov 5, 2005
    Messages:
    193
    Likes Received:
    0
    Location:
    ca.
    I'm still learning about the ins & outs on this bike.My question is:how much air should I have in the rear shocks w/hard bags filled & medium sz. "T-Bag" on the luggage rack.No passenger.
    Some people I spoke to said;12-15psi...seems high to me.The owners manual matrix chart recommends 10-15psi for a solo rider/gear(does not really state info about gear).I rode the bike a few hours ago with 13psi in the shocks & felt terrible.I'm 170lbs. if this helps.Other than this,I love this bike!Thanks in advance for any thoughts or comments,00 wildglide:cool:
    Last edited: Apr 13, 2008
  2. Ultra Al

    Ultra Al New Member

    Joined:
    Oct 17, 2005
    Messages:
    306
    Likes Received:
    0
    Location:
    West Texas
    I fiddled with mine on the Road King until I got tired of it. Seems I could never get them adjusted satisfactory for me. The bike seemed to waller going into curves. So my solution was to $hitcan them and replace them with Progressive 440's, problem solved. Al
  3. Ultra Al

    Ultra Al New Member

    Joined:
    Oct 17, 2005
    Messages:
    306
    Likes Received:
    0
    Location:
    West Texas
    BTW we are about the same weight me being 165 +/- Al
  4. 00 wildglide

    00 wildglide New Member

    Joined:
    Nov 5, 2005
    Messages:
    193
    Likes Received:
    0
    Location:
    ca.
    Thanks Al,I think I'll leave them at 10psi. for now.I'm tapped out for H-D funds since doing the cams & dyno tunning.I will look into other shocks latter,Thanks again--00 wildglide:cool:
  5. cowboy

    cowboy Moderator Staff Member

    Joined:
    Apr 19, 2006
    Messages:
    9,926
    Likes Received:
    50
    Location:
    Alvin TX
    I about 180 & with the wife on & rnu 14lbs , just kinda work out your gear weight as a exta person & & start out about 9-10 lbs , also are you useing the little shock pump from HD , as a regular air hose can blow your shocks out real quick
  6. 00 wildglide

    00 wildglide New Member

    Joined:
    Nov 5, 2005
    Messages:
    193
    Likes Received:
    0
    Location:
    ca.
    Thanks Cowboy,
    I have an older pump made by PROGRESSIVE SUSPENSION.The thing about this pump/gauge that puzzles me is the lowest increment seems to be 5psi even though the gauge has a "0".I may buy a new one from H-D:confused:.
    I saw some shocks from "Legends" suspension...Wow!$!$!$!...maybe stock is o.k. for now.Talk to you latter,00 wildglide:cool:
  7. cowboy

    cowboy Moderator Staff Member

    Joined:
    Apr 19, 2006
    Messages:
    9,926
    Likes Received:
    50
    Location:
    Alvin TX
    yep those new model shocks are a real shock :eek: the HD pump is about $40
  8. Ultra Al

    Ultra Al New Member

    Joined:
    Oct 17, 2005
    Messages:
    306
    Likes Received:
    0
    Location:
    West Texas
    The Progressive 440's ain't cheap either. What i like about them is you can adjust the firmness on the road without any tools. AL
  9. VYBR8ER

    VYBR8ER New Member

    Joined:
    Apr 5, 2007
    Messages:
    257
    Likes Received:
    0
    Location:
    Central Valley, CA
    I normally set up the rear shocks at 10PSI for a new bike going out the door. Most customers come back and want a little more air in them for 2 up riding. On my own bike I run 12-15 psi solo but I weigh 230. Don't know what to run for 2 up as I don't have a rear seat on my roadglide.
  10. HAMSHOG

    HAMSHOG New Member

    Joined:
    Sep 5, 2007
    Messages:
    92
    Likes Received:
    0
    Location:
    Palm Springs, CA
    I have a Harley pump that's 3 years old and took a sh*t. :banghead: More quality Harley products...But if you have a compressor at home you can use it. Just set the pressure to 20#'s and fill er up. Adjust as needed. I read a post on another forum that someone had tested the air shocks to over 100#'s with no problems.
  11. dukeofdirt

    dukeofdirt New Member

    Joined:
    Dec 7, 2006
    Messages:
    41
    Likes Received:
    0
    Check out airshock pumps for bicycles on ebay. I got a really nice NIB for less than $20...works great!
  12. chucktx

    chucktx Moderator Staff Member

    Joined:
    Jul 5, 2005
    Messages:
    12,545
    Likes Received:
    10
    i got mine in wallyworld....bicycle section......real inexpensive.................:)
  13. dukeofdirt

    dukeofdirt New Member

    Joined:
    Dec 7, 2006
    Messages:
    41
    Likes Received:
    0
    W T F Chucktx is absolutely correct. There is no way that the air from my
    ebay bicycle airshock pump can possibly be as good as the air from the HD
    pump. There is something about that Bar & Shield logo that just makes everything better. What was I thinking? $40 air vs $17 air...I am not worthy!
    Last edited: Apr 16, 2008

Share This Page