1. After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
  2. Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.

    There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.
Bike Talk Motorcycle Forum is For Sale Welcome to Bike Talk

Forward Controls

Discussion in 'Motorcycle Tech Talk' started by abbydog301, Jan 15, 2006.

  1. abbydog301

    abbydog301 New Member

    Joined:
    Jan 15, 2006
    Messages:
    1
    Likes Received:
    0
    I put forward controls on my ironhead and want to take the existing foot pegs off. On the shifting side there is a large bolt that comes out of the outer primary cover. I was wondering what others have done to cover, cut, remove ... this bolt.

    Thanks
    abbydog301, Jan 15, 2006
    #1
  3. oldsuperglide

    oldsuperglide New Member

    Joined:
    Jan 15, 2006
    Messages:
    44
    Likes Received:
    0
    Location:
    dallas,tx
    the stud on the left side goes thru the primary. you will need to unscrew it and put a plug in it so the oil won't run out, makes a big mess.

    the one on the right holds the kicker cover on for support for kicker (if u have one). if no kicker you can unscrew it you might need to put a plug in also. the hole might be a blind hole.(does not go all the way thru)
    for got to ask what year ?
    Last edited: Jan 15, 2006
    oldsuperglide, Jan 15, 2006
    #2

Share This Page

XenPorta © Jason Axelrod from 8WAYRUN.COM