1. After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
  2. Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.

    There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.
Bike Talk Motorcycle Forum is For Sale Welcome to Bike Talk

Handle Bars

Discussion in 'Motorcycle Tech Talk' started by tdm, Mar 28, 2013.

  1. tdm

    tdm New Member

    Joined:
    Mar 24, 2013
    Messages:
    1
    Likes Received:
    0
    Location:
    Moorhead,MN
    Will a set of 14"apes that were on a 2000 Screamin Eagle Road Glide fit on a 2006 ElectraGlide Standard? Both have fuel injection. Are the throttle cables,brake line, clutch cable the same?
    Thanks
    tdm, Mar 28, 2013
    #1
  3. FLHTbiker

    FLHTbiker Moderator Staff Member

    Joined:
    Nov 3, 2004
    Messages:
    18,516
    Likes Received:
    252
    Location:
    Oregon
    The guy on here that can answer that question is HRK he has had both. It's going to depend on the the dimensions at the clamps but you probably already know that.
    FLHTbiker, Mar 28, 2013
    #2
  4. Tommyc

    Tommyc Active Member

    Joined:
    Jun 3, 2010
    Messages:
    1,157
    Likes Received:
    0
    Location:
    south Florida
    You will prolly have to replace the rider. :roflmao:
    Tommyc, Mar 28, 2013
    #3
  5. hotroadking

    hotroadking Super Moderator Staff Member

    Joined:
    Jun 16, 2004
    Messages:
    13,682
    Likes Received:
    584
    Location:
    Mouseville USA
    I would imagine that you could put them on, but you'd have
    to watch clearance because the FLHT faring is right up on the bars
    and the Road Glide is like an RK so you can go straight up.

    If you have no rearward bend then it's going to be tight
    but you can do it, as far as cables, pretty sure you'll need longer brake, throttle and
    have to extend the wire harness.
    hotroadking, Mar 28, 2013
    #4

Share This Page

XenPorta © Jason Axelrod from 8WAYRUN.COM