1. After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
  2. Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.

    There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.
Bike Talk Motorcycle Forum is For Sale Welcome to Bike Talk

Help with rear turnsignals

Discussion in 'Motorcycle Tech Talk' started by pooman, Aug 22, 2005.

  1. pooman

    pooman New Member

    Joined:
    Aug 22, 2005
    Messages:
    1
    Likes Received:
    0
    I need to get the electrical wire out of the chrome rear turn signals on my 2004 fatboy.How do I do it with out destroying the light? I have the brackets removed from the bike and unplugged from the taillight.


    Thanks for any help with this.
    pooman, Aug 22, 2005
    #1
  3. hotroadking

    hotroadking Super Moderator Staff Member

    Joined:
    Jun 16, 2004
    Messages:
    13,682
    Likes Received:
    584
    Location:
    Mouseville USA
    If you are trying to get the wires through the rear mount, you can remove the deusch connector, Inside that connector are small plastic tabs that you lift with a tiny flat blade screwdriver like you'd use on glasses.

    Be careful and don't pull hard and break it, if you have the retaining clip up the wire will pull out easily.

    It can take some patience and practice.

    If you have the SM it shows how all the connectors come apart.
    hotroadking, Aug 22, 2005
    #2

Share This Page

XenPorta © Jason Axelrod from 8WAYRUN.COM