1. After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
  2. Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.

    There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.

Hooker True Duals

Discussion in 'Motorcycle Tech Talk' started by rockajet, Aug 29, 2004.

  1. rockajet

    rockajet New Member

    Joined:
    Aug 29, 2004
    Messages:
    2
    Likes Received:
    0
    I'm looking for a true dual set for my Road King. Has anybody had any experience with the Hooker system? Any input on BUB, V&H, Samson,etc. would be appreciated.
  2. ffflhtcui

    ffflhtcui New Member

    Joined:
    May 28, 2004
    Messages:
    81
    Likes Received:
    0
    I've no experience with this subject but I have read several different threads on this forum about it.

    Try doing a search in this forum for "true dual" and there should be several things pop up.

    Good luck!
  3. steve77265

    steve77265 New Member

    Joined:
    Aug 24, 2004
    Messages:
    7
    Likes Received:
    0
    Rinehart duals...2003 Road King (Screaming Eagle)

    Yep...check the posted question & if you have any ??? please post?
    Steve
  4. EGlide

    EGlide New Member

    Joined:
    Apr 2, 2004
    Messages:
    9
    Likes Received:
    0
    Location:
    Spring Valley, CA
    I have a 2002 flhtci bagger. I am running a stock ecm, screamng eagle breather, PC-IIIr and the Hooker True Dual exhaust with the mufflers turned out. I now have them tuned to 50% baffled (thanks CD). I am running the generic dynojet map and produced 73 HP and 85 ft lbs of torque, relatively flat across the rpm range. This was prior to adjusting the mufflers to my current setting. I have not had the bike dyno'd since the adjustment. I previously had the pipes set to its most quiet setting "max torque".

    Since adjusting the mufflers to half-way between max torque and max HP I have noticed an improvement in acceleration, and what I find odd, is a reduction in decel popping! I always thought that by setting the pipes to max torque (basically on bafflel only) the popping on decel would be less. Since dynojet has set this map with one pipe set to max torque and the other to max rpm, setting both pipes in between has dramatically improved the performance of my application.

    I really like the FAT look of the True duals. The best part of this application is I have an "old man's bagger" that has great 2 up performance, and sounds like a small block chevy V8 running fresh glasspacks!.

    BTW, If you look at the HP gallery on another popular site, you will find that the Hooker True Dual, stepped header and muffler performs right at the top with its competitors.

    Mike :D
  5. Rick

    Rick New Member

    Joined:
    May 20, 2004
    Messages:
    2
    Likes Received:
    0
    Road King 96

    I got the Hooker True Duals, they work great and of course sound great. They were a little differcurt on the install but after that it's all good. Tucson Rick

Share This Page