1. After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
  2. Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.

    There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.

Idle problem

Discussion in 'CVP Stage 1 Tuners Kit' started by higinio31, Mar 28, 2010.

  1. higinio31

    higinio31 Member

    Joined:
    Mar 4, 2010
    Messages:
    8
    Likes Received:
    0
    Location:
    Kissimmee, FL
    Hello, I have an '05 dyna super glide and put in the kit with the #48 idle, #195 main and the EZ just mixture needle screw. I also have the SE a/c on the bike and can not get it stumble as I seat the mixture screw. Do I have the wrong idle and main combination? The bike also backfires when I turn it off, can I get a little help?

    H
  2. kenfuzed

    kenfuzed Administrator Staff Member

    Joined:
    Jan 1, 2005
    Messages:
    10,513
    Likes Received:
    140
    Location:
    Las Vegas NV
    You didn't mention if you have an exhaust that is more open than stock but I suspect the jetting may be on the rich side. I would start with the #46 pilot and #190 main and tune up from there. Twin Cams are known to not give as much of a stumble when adusting the mixture screw in since their ignition tends to compensate. An accumulation of fuel as the engine shuts off can cause a backfire.

Share This Page