1. After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
  2. Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.

    There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.

Ignition timming for 75 sportty with points

Discussion in 'Motorcycle Tech Talk' started by whacker, Jun 23, 2006.

  1. whacker

    whacker Active Member

    Joined:
    May 7, 2006
    Messages:
    276
    Likes Received:
    0
    Location:
    Newaygo,Mi.
    I'm having a hard time seeing the two dots for the rear cylinder,to make sure it is timed right,any ideas on how to veiw it better,The front one is very visible.I've tried to paint it but it doesn't seem to help,I use the open hole plug in the timming hole,it seems to work better than the clear plug,just have to hold it in tight so I don't get sprayed with oil.
  2. chucktx

    chucktx Moderator Staff Member

    Joined:
    Jul 5, 2005
    Messages:
    12,545
    Likes Received:
    10
    try a small dowl rod or simmilar with some emerycloth. try to rub it in the holes to brighten them up a bit. i have cleaned the area with laquer thinner on a rag...let dry and used a paint stick to mark them with also. hope this helps
    chuck
  3. whacker

    whacker Active Member

    Joined:
    May 7, 2006
    Messages:
    276
    Likes Received:
    0
    Location:
    Newaygo,Mi.
    I replaced the "lobe"in the mechanical advance,Now I can see the dots,think the other lobe was cut wrong.:)
  4. chucktx

    chucktx Moderator Staff Member

    Joined:
    Jul 5, 2005
    Messages:
    12,545
    Likes Received:
    10
    glad ya cured your problem.....have fun
    chuck

Share This Page