1. After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
  2. Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.

    There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.
Bike Talk Motorcycle Forum is For Sale Welcome to Bike Talk

Kuryakyn Brawny Knuckle Bars on a Deuce

Discussion in 'Motorcycle Tech Talk' started by us019447, Feb 21, 2005.

  1. us019447

    us019447 New Member

    Joined:
    Feb 21, 2005
    Messages:
    1
    Likes Received:
    0
    I plan on replacing my Deuce handlebars with Kuryakyn's Brawny Low Rise Knuckle Bar(DP P/N KA1704), end rise = 2", width =36.5", pullback = 0.5.
    Has anyone used these bars on the Deuce? Will I need to lengthen my wiring, brake line, and clutch cable? The clutch cable looks plenty long enough, but not sure about everything else.
    Thanks!
    us019447, Feb 21, 2005
    #1
  3. hotroadking

    hotroadking Super Moderator Staff Member

    Joined:
    Jun 16, 2004
    Messages:
    13,682
    Likes Received:
    584
    Location:
    Mouseville USA
    I haven't but you could check with kuryakyn at thier web site about that.

    I ran Carlini Drags 9 inch pull back on a softail and the stock cables were fine, I had to add some to the wires to make them work on pulling them through.
    hotroadking, Feb 23, 2005
    #2

Share This Page

XenPorta © Jason Axelrod from 8WAYRUN.COM