1. After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
  2. Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.

    There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.

Looking for Palm Beach engine builder

Discussion in 'Motorcycle Tech Talk' started by Lynmark1, Dec 20, 2013.

  1. Lynmark1

    Lynmark1 Member

    Joined:
    Dec 8, 2013
    Messages:
    17
    Likes Received:
    5
    Location:
    West Palm Beach
    I need to have my 1985 EVO cylinders bored. After tearing down the motor I discovered a few deep scratches. I am having a problem finding anyone interested in helping me with this old bagger. How far can I bore stock cylinders before having to pay up for a big bore kit?
  2. prodrag1320

    prodrag1320 Active Member

    Joined:
    Oct 27, 2011
    Messages:
    299
    Likes Received:
    4
    Location:
    deland,florida
    regular pistons go .030,you can go with a wiseco 85" kit that bores them .060.we`ve done quite a few of the 85" ers with no probs what so ever.kinda a cruise,but we`re up in deland (Daytona)
  3. Lynmark1

    Lynmark1 Member

    Joined:
    Dec 8, 2013
    Messages:
    17
    Likes Received:
    5
    Location:
    West Palm Beach
    Good to know and thanks in advance.
  4. Fatboy128

    Fatboy128 Well-Known Member

    Joined:
    Mar 23, 2011
    Messages:
    6,713
    Likes Received:
    408
    Location:
    Long Island, NY
    Prodrag is the place for you to take your engine. He's done many for the guys here on bike talk.


    Sent from my iPhone using Tapatalk 2
  5. hotroadking

    hotroadking Super Moderator Staff Member

    Joined:
    Jun 16, 2004
    Messages:
    13,682
    Likes Received:
    584
    Location:
    Mouseville USA
    KIrby does great work Deland is just north of Orlando,

    Baggerpaul is in South Florida...
  6. baggerpaul

    baggerpaul Well-Known Member

    Joined:
    Aug 8, 2011
    Messages:
    2,670
    Likes Received:
    108
    Location:
    south fl.
    If you need a set of cylinders done down south in palm beach County red racing.but it wont be as good as kirbys finish. They will be round and true but not as nice a finish. Kirby does my cylinders. And the ring seal is spot on when im done. I can build it for ya .
  7. hotroadking

    hotroadking Super Moderator Staff Member

    Joined:
    Jun 16, 2004
    Messages:
    13,682
    Likes Received:
    584
    Location:
    Mouseville USA
    Send it to Kirby and let Paul build it

Share This Page