Modifying an 07 Dyna (EFI/air cleaner)

I could sure use some help with picking an air cleaner and an EFI module for a new Dyna Wideglide.

I've never owned a fuel injected Harley and I understand that the PCIII is the accepted way to go but has anyone checked out the Fuelpak by V & H? Since I'm going to install the Python staggered duals, why would I want to spend big bucks on the PCIII (plus dyno time , etc.) when I can spend little bucks on the Fuelpak (no dyno needed) and do the mapping myself...that is if the Fuelpak works well. Someone help me.

Next, what should I use for the air cleaner? Is any free flow acceptable? Any suggestions for performance and looks?

Thanks for any help.

Redf

I tried the Screaming eagle a/c with the python pipes and the stage 1 flash. It ran way too lean. I ordered a PC3 from jamie at fuelmoto. he tuned the PC3 to the modifications I gave him, and sent it ready to install. I have since tweaked it slightly, and it runs great. Don't waste the money on the stage 1 flash. The pythons are great pipes, and the bike runs like a banshee. I would go with an air cleaner set up that comes withthe K&N, it's much higher quality than the SE paper filter.

I have not had the experience with a VH FP, but have heard both good and bad. The PC3 is easy to use, and seems to be more versatile.

BTW, mine is an 06 Street bob, which is a similar setup.