1. After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
  2. Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.

    There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.
Bike Talk Motorcycle Forum is For Sale Welcome to Bike Talk

Need Help Asap

Discussion in 'CVP Stage 1 Tuners Kit' started by Buckeye47Fan, Jul 20, 2008.

  1. Buckeye47Fan

    Buckeye47Fan New Member

    Joined:
    Jul 6, 2008
    Messages:
    15
    Likes Received:
    0
    Location:
    Ohio
    Ken, I fuc$$d up man.........I was confused by the picture in the intructions and I drilled out a different plug. If the carb is facing you(while it's attached to the bike) there is another metal plug on the left side towards the top. What is it ? There was no screw just a hole that goes into the carb.

    Please don't tell me I have to buy a new carb......:gah:
    Buckeye47Fan, Jul 20, 2008
    #1
  3. koondawg2004

    koondawg2004 New Member

    Joined:
    Jun 24, 2008
    Messages:
    11
    Likes Received:
    0
    Location:
    TX
    You might want to try plugging it up with a rubber plug with a flange or maybe some JB weld.
    koondawg2004, Jul 22, 2008
    #2
  4. kenfuzed

    kenfuzed Administrator Staff Member

    Joined:
    Jan 1, 2005
    Messages:
    10,513
    Likes Received:
    140
    Location:
    Las Vegas NV
    If its the indented steel plug on the side it is similar to a freeze plug. Its installed at the end of the manufacturing process to seal an air passage. Seal it with some JB Weld, just don't let it seep down into the passage. Do this and you'll be fine.
    :cheers:
    kenfuzed, Jul 22, 2008
    #3

Share This Page

XenPorta © Jason Axelrod from 8WAYRUN.COM