1. After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
  2. Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.

    There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.
Bike Talk Motorcycle Forum is For Sale Welcome to Bike Talk

No Lights

Discussion in 'Motorcycle Tech Talk' started by SPORSTERBOY, Mar 26, 2006.

  1. SPORSTERBOY

    SPORSTERBOY New Member

    Joined:
    Mar 26, 2006
    Messages:
    1,009
    Likes Received:
    0
    Location:
    spokane, wa.
    I Made Some New Bars After Putting Them On I Lost My Turn Lights And Horn I Had Low Beem When I Turned On High Beem I Lost All Electical The Only Thing That Works Is The Start Off And Run I Inspected The Wireing Everything Looks Fine
    SPORSTERBOY, Mar 26, 2006
    #1
  3. stevenh

    stevenh New Member

    Joined:
    Dec 17, 2005
    Messages:
    184
    Likes Received:
    0
    Location:
    New Hampshire
    Hi, I just put risers on my girlfriends bike. There was a ground wire around one of the riser bolts down in back of the headlight. Not sure if it's the same set though.
    stevenh, Mar 26, 2006
    #2
  4. SPORSTERBOY

    SPORSTERBOY New Member

    Joined:
    Mar 26, 2006
    Messages:
    1,009
    Likes Received:
    0
    Location:
    spokane, wa.
    Still No Lights

    Thanks For The Sugestion I Never Pulled The Risers I Used A Voltege Tester At The Two Connections Of The Harness I Have Power To The Throtle Side Except The Blinker I Hooked It Up To The Clutch Side And Was Able To Conrol My Brake Light With The Hi And Low Beem Switch Hi Being On
    SPORSTERBOY, Mar 26, 2006
    #3

Share This Page

XenPorta © Jason Axelrod from 8WAYRUN.COM