1. After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
  2. Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.

    There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.
Bike Talk Motorcycle Forum is For Sale Welcome to Bike Talk

rev limiter 1200 sportster

Discussion in 'Motorcycle Tech Talk' started by check it, May 2, 2006.

  1. check it

    check it New Member

    Joined:
    Nov 11, 2005
    Messages:
    5
    Likes Received:
    0
    is their a rev limiter for '03 sportster 1200 ???? do they have a aftermarket part for the ignition module ?????? trying to make my 1200 max out ........ carburator with choke...... drag pipes .........screamming eagle air filter......... upgraded jets for carb.....drag chain and sprockets.........
    Last edited: May 5, 2006
    check it, May 2, 2006
    #1
  3. cowboy

    cowboy Moderator Staff Member

    Joined:
    Apr 19, 2006
    Messages:
    9,926
    Likes Received:
    50
    Location:
    Alvin TX
    Do you have a carb or EFI? If carb just rejet & change you pipes , if EFI eather a harley dealer Or get A power Commander so you can down load a map & reset it yourself :eek:
    cowboy, May 2, 2006
    #2
  4. SPORSTERBOY

    SPORSTERBOY New Member

    Joined:
    Mar 26, 2006
    Messages:
    1,009
    Likes Received:
    0
    Location:
    spokane, wa.
    Put Some Power Cones In Your Drags, Not Only More Hp, But Creates Better Back Preasure. If You Want The Max Spend The Ducks For A Aftermarket Carb. My O3' Isn't Very Good On The Carb Side For Adjustments.
    SPORSTERBOY, May 2, 2006
    #3
  5. Killer-B

    Killer-B New Member

    Joined:
    Jan 22, 2005
    Messages:
    841
    Likes Received:
    0
    Check it: if you want to raise your RPM’s you will have to get an after-market ignition upgrade. You can have your stock carburetor reworked or up grade that too, if your into making (useable) power, get rid of the drag-pipes.
    Don’t hate me, IJMO…
    Killer-B, May 2, 2006
    #4
  6. chucktx

    chucktx Moderator Staff Member

    Joined:
    Jul 5, 2005
    Messages:
    12,545
    Likes Received:
    10
    the cv carb is a great carb....can be modified to handle most of the power you want to get without major mods..inexpensive to do...you will need a new ign mod to get the rpms up...do the pipes with some baffels, put a ness airfilter or such for better flow...or rework yours....contact direct parts inc. at the top of this page......they will get you lined up for less$ so ya have more for bling/bling.
    chuck
    chucktx, May 2, 2006
    #5
  7. SPORSTERBOY

    SPORSTERBOY New Member

    Joined:
    Mar 26, 2006
    Messages:
    1,009
    Likes Received:
    0
    Location:
    spokane, wa.
    Me, Slow And Low. If It Has Enough Power To Get Me Along With Traffic I'm Good. No Power Junkie Here:)
    SPORSTERBOY, May 2, 2006
    #6

Share This Page

XenPorta © Jason Axelrod from 8WAYRUN.COM