Rocker arms noise

just got done rebuilding top end on 1993 FLHTC .I put JIMS roller Rocker Arms in and andrews cam EV27 and Adjustable pushrod. My question is are rockerarms noise all time when get on ? I adjust them by book.are do you just more? and far. got over 500 miles on rebuilt.

roller rockers are supposed to be noisier than regulars. Is there some reason why you chose them? They only have a necessary benefit in high lift cam applications where the side loading of the valve stem becomes an issue. In the Twin cams, reputable techs are suggesting them for lifts over .560"

depends on what you call loud, I hear mine, ever heard a shovel or iron head racken away:roflmao:

Are you sure it's rocker arms you're hearing? I'd bet lifters and/or pushrods in the tubes - check hotroadking's post as he's obviously seen it too. I've got Jim's roller rockers in one application & they're not noisy @ all. I hate adjustable pushrods with an utter passion & would never use them with hydraulic lifters, but in that application I have to, due to taller than stock engine & solid (Jim's roller) lifters. So there has to be some slack & you can hear that the pushrods are not tight from the lifters to the rockers, especially when the engine's cold. But warmed up, the valvetrain isn't any noisier than my street Sportsters with hydraulic lifters. The EV27 cam specs are .497" lift, 236 duration intake, 240 exhaust, so adjustable pushrods are not necessary in that application & I'd get rid of 'em.

clearance

I was reading somewhere that sometimes roller rockers will hit the top of the rocker cover and you have to remove some material. I wouldn't think that because an EV-27 is not very high lift that they should need any more clearance than stock.
Just sharing what I read. Maybe put your hand on top of the rocker box and feel if it's hitting it.

I dont what to get rid push rods. ever thing I read on jims rockarms was good . and I got no money to send .

ever thing check out.