1. After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
  2. Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.

    There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.
Bike Talk Motorcycle Forum is For Sale Welcome to Bike Talk

Screamin eagle

Discussion in 'Motorcycle Tech Talk' started by oldbikemike, Feb 16, 2007.

  1. oldbikemike

    oldbikemike New Member

    Joined:
    Feb 12, 2007
    Messages:
    2
    Likes Received:
    0
    Location:
    CANADA
    I have a dyna/94 low rider which i wanted to add a screamin eagle ignition module to,but when i plug it in the bikes rpm drops off almost to the point of stalling,thats when the bike is warmed up.It will not keep running if the bike is cold.If i plug the orignal one back in then everything is back to normal.What do you people think is causing this module to work like this?
    Thanks for any info........
    oldbikemike, Feb 16, 2007
    #1
  3. chucktx

    chucktx Moderator Staff Member

    Joined:
    Jul 5, 2005
    Messages:
    12,545
    Likes Received:
    10
    the settings in the module are not correct for your bike. do the instructions tell you how to adjust??? or does it need mapped?? the problem is definatly the module, not the bike
    chucktx, Feb 16, 2007
    #2
  4. oldbikemike

    oldbikemike New Member

    Joined:
    Feb 12, 2007
    Messages:
    2
    Likes Received:
    0
    Location:
    CANADA
    screamin eagle module

    I am wondering if the dealer gave me the right module,its module #32596-96 and says it is for 1984-1995 1340 models? I can,t find anywhere to contact screamin eagle to get any info,so any you can give would be appreciated.Thanks :::
    oldbikemike, Feb 16, 2007
    #3
  5. Slimjim

    Slimjim Active Member

    Joined:
    Jul 22, 2006
    Messages:
    433
    Likes Received:
    4
    Location:
    Georgia
    According to my parts book, it looks like the correct part number. It also says the only thing it should do is increase the rev limit (6000 rpm) of the stock module while maintaining the lower and mid range ignition curve of the orginal equipment. It doesn't appear to have any adjustments or mapping. It appears you may have a bad part out of the box. Good luck.
    Slimjim, Feb 17, 2007
    #4

Share This Page

XenPorta © Jason Axelrod from 8WAYRUN.COM