1. After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
  2. Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.

    There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.
Bike Talk Motorcycle Forum is For Sale Welcome to Bike Talk

Slow jet question

Discussion in 'CVP Stage 1 Tuners Kit' started by omgtkk, Mar 6, 2011.

  1. omgtkk

    omgtkk New Member

    Joined:
    Mar 6, 2011
    Messages:
    6
    Likes Received:
    0
    I just finished installing the complete tuners kit in my '99 FXR2 with a stock 80" evo, Ness air cleaner, Slip-on pipes, and ,mild Andrews cam. The bike is running well, but while doing the final tune I find that even if I turn the idle mixture screw all the way in until it's lightly seated, the bike does not stumble. I assume the slow speed jet is too large (46). Should I back off to a 45? Also, can I change this jet with the carb still on the bike?
    Thanks.
    omgtkk, Mar 6, 2011
    #1
  3. chucktx

    chucktx Moderator Staff Member

    Joined:
    Jul 5, 2005
    Messages:
    12,545
    Likes Received:
    10
    yes the jet can be changed with the carb on the bike...sorta...you have to remove it from the intake, but dont have to remove the throttle cables.....try the jet and see what happens.....
    chucktx, Mar 6, 2011
    #2

Share This Page

XenPorta © Jason Axelrod from 8WAYRUN.COM