1. After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
  2. Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.

    There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.
Bike Talk Motorcycle Forum is For Sale Welcome to Bike Talk

Starter problem fixed

Discussion in 'Motorcycle Tech Talk' started by gjordan456, Jun 10, 2011.

  1. gjordan456

    gjordan456 Member

    Joined:
    Feb 8, 2008
    Messages:
    4
    Likes Received:
    0
    Location:
    WNY
    been chasing this starter problem for over a year now, after several starters and ring and pinion gears I finaly figured it out, the jack shaft was'ent throwing far enough, all parts where were correct cept the spring in there seemed weak, streched that out a bit and had a gun smith buddy of mine make up a shim, now the pinion fully engages the ring gear, not sure why the pinion was falling short so maybe someone in here can explain that one to me, in the mean time I'm going riding!!!
    gjordan456, Jun 10, 2011
    #1
  3. chucktx

    chucktx Moderator Staff Member

    Joined:
    Jul 5, 2005
    Messages:
    12,545
    Likes Received:
    10
    not the first time i have seen springs weaken over time. spring steel will weaken over time due to use and heat. one of the first things to check when having engaging problems is the spring. glad ya got it going, and welcome to the forum!!
    chucktx, Jun 10, 2011
    #2

Share This Page

XenPorta © Jason Axelrod from 8WAYRUN.COM