1. After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
  2. Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.

    There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.

tru dual sound

Discussion in 'Motorcycle Tech Talk' started by bambidee, Jun 29, 2014.

  1. bambidee

    bambidee Active Member

    Joined:
    Jun 12, 2011
    Messages:
    453
    Likes Received:
    74
    Location:
    upstate n/y
    my 2000 rk is running great, looking for a deeper and possibly slightly quieter exhaust sound. motor is now 95 inch, 10.5 to 1 with feuling 534 cams, 1.725 roller rockers,aftermarket air cleaner, jetted, (plugs look great) and is as said carb.`looking at possible Power House Competitor tru dual or Bassini stepped tru dual my other option is start with a set of tru dual head pipes. Not looking to stir the pot of different design 2-1, merged or other options. just looking for the (sweet sound) right now have stock head pipes with 16741 V/H slipons. they are ok but just a little to much blat for my personal choice, want a deeper rumble.
  2. JohnnyBiker

    JohnnyBiker Well-Known Member

    Joined:
    Mar 25, 2010
    Messages:
    9,568
    Likes Received:
    205
    Location:
    Minnesota
    Vance and Hines Dresser Duals with 4" Monster Rounds.
  3. marc 55

    marc 55 Well-Known Member

    Joined:
    Jul 27, 2012
    Messages:
    2,118
    Likes Received:
    126
    Location:
    Basking Ridge, N.J.
    Go to a rally and listen for something you like and then ask...I'm happy with my V&H tru dual head pipes and slipons...
  4. Lucifer

    Lucifer Well-Known Member

    Joined:
    Mar 20, 2008
    Messages:
    3,861
    Likes Received:
    102
    Location:
    Cape Breton NS,Canada
  5. Lucifer

    Lucifer Well-Known Member

    Joined:
    Mar 20, 2008
    Messages:
    3,861
    Likes Received:
    102
    Location:
    Cape Breton NS,Canada
    I'm running the Supertrapp SE/Kerker slip ons with the Mikuni PAT baffle...nice rumble, not too loud for me but YMMV
  6. baggerpaul

    baggerpaul Well-Known Member

    Joined:
    Aug 8, 2011
    Messages:
    2,670
    Likes Received:
    108
    Location:
    south fl.
    WELL i have had my share of diffrent pipes . on my hot rod build . and i have to tell ya the s&s power duals with the crusher mufflers perform the best are quiet at idle and speed .and have an awesome sound when you throttle it . nice flat table top torque curve . im at 3.7/8 bore 10.5.1 a little over 600 lift 1.940 heads 1.625 exhaust .1.675 rockers . 200 psi ccp. so builds are similar pulls hard with this exhaust and it routes the pipe under the bike like a late model. hope this helps

Share This Page