-
After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
-
Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.
There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.
Bike Talk motorcycle forum
«
»
May
25
I ride a 97 superglide,I change the frt.end to a wide glide with the org.39 mm
forks and at times I have a frt.shimmy(handle bars go back and forth at 65 to 75mph w/ the ol lady on it it will not do it..I changed the fork oil to a heaver oil ,but to me it seems to have alot of travel and the tubes are equal.miles on the bike are 17,000miles.I checked the bushings for the swing arm and they are o.k.rear wheel bearings are new.?help please
HawkEye
forks and at times I have a frt.shimmy(handle bars go back and forth at 65 to 75mph w/ the ol lady on it it will not do it..I changed the fork oil to a heaver oil ,but to me it seems to have alot of travel and the tubes are equal.miles on the bike are 17,000miles.I checked the bushings for the swing arm and they are o.k.rear wheel bearings are new.?help please
HawkEye
May
25
All,
In the near future, I plan to replace my rear fender on my 94 DynaGlide Convertible due to damage. I don't know the width that I need to look for or the variety of styles to choose from due to it being a Dyna.
Anyone have any leads on the width that i need to look for? I kinda want to go with a different style, but unsure of measurements.
Any help on the matter will be greatly appreciated!
In the near future, I plan to replace my rear fender on my 94 DynaGlide Convertible due to damage. I don't know the width that I need to look for or the variety of styles to choose from due to it being a Dyna.
Anyone have any leads on the width that i need to look for? I kinda want to go with a different style, but unsure of measurements.
Any help on the matter will be greatly appreciated!
May
25
Hello,
I just registered with this board, and have a question about Harley v-rods. I'm in the process of buying one, and want to know if anyone knows of any problems? It's a 2004 model, and is currently tuned for high elevation. I'm at sea level. How much tuning am I going to have to do to get it running at '0' altitude? Thanks for any help.
cuedude
I just registered with this board, and have a question about Harley v-rods. I'm in the process of buying one, and want to know if anyone knows of any problems? It's a 2004 model, and is currently tuned for high elevation. I'm at sea level. How much tuning am I going to have to do to get it running at '0' altitude? Thanks for any help.
cuedude
May
23
I have a 97 softtail custom. About half the time I start it the starter sounds like it is either grinding or not completely engaging. Sounds like hell and I know something nots right. Help!
May
22
I was reading Randy's question,and I'm hearing tapping noises from my ol 87 when I'm over 60mph.She runs great and just purrs,then clatters a little at higher speeds. The bike had top-end done about 5k mi's ago,I'm wondering if this is normal on these early evo motors.Also, this an electraglide custom classic. It has "Genuine Harley Davidson" painted on the tank,and is #284 of 800 made that year. Anyone else riding one of these? Hard to find any specific info on 'em. thanks.....O.F.
Page 1986 of 2361
XenPorta
© Jason Axelrod from 8WAYRUN.COM