-
After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
-
Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.
There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.
Bike Talk motorcycle forum
«
»
Mar
27
I just bought a 2006 Road Glide. I want an intercom, but not the one available for the Advanced Audio System (AAS) (too many extras need to be purchased). I'm looking at the IntaRide RP1 Duo or the Starcom1 Advanced. Here's the issue....I want to tap into the AAS' rear speaker output and run that to the RP1 or Starcom’s music input connector. I found the connector I need, but it taps into the speaker wires with wiretap connectors. I would rather find the OEM style connectors Harley uses. Who makes or where can I buy the OEM style weatherproof connectors used on the AAS harness? Additionally, does anyone know how this AAS system is installed? Would I need the AAS wiring harness that allows the connection of additional AAS devices, which includes the rear speakers (which is why I want OEM...
Mar
26
I Made Some New Bars After Putting Them On I Lost My Turn Lights And Horn I Had Low Beem When I Turned On High Beem I Lost All Electical The Only Thing That Works Is The Start Off And Run I Inspected The Wireing Everything Looks Fine
Mar
26
1979 sportster. After the problem with it only hitting on the front cylender The bikes running great now. the problem was in the cam timing. now that thats over with. I took her out for a spin and it started popping out of 3rd but now it only has 1st and N and wont shift up any more than that. so I guess I will need to pull the trans now. I need to replace the shift shaft anyways becouse its stripped out but rigged with a bolt to hold it in place.I have a manual but just have never been in to one of these yet. is there any thing I need to watch for. or any suggestions
Mar
26
has been balanced . new rubber mounts. aligned .frame checked for cracks. new cam new voes switch. still vibrates.
Mar
26
I have a 1998 Dyna Wide Glide HD. It uses a 133t rear belt drive with 32t front pulley and a 70t rear pulley. I want to swicht to chain drive. I need a chain convertion kit with both sprockets and the chain, or to by it individually. Does anybody have any ideas where or how I can get this? Thank you for your help.
Page 2025 of 2361
XenPorta
© Jason Axelrod from 8WAYRUN.COM