1. After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
  2. Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.

    There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.

107 Kit & cams

Discussion in 'Motorcycle Tech Talk' started by cardboard, Nov 11, 2013.

  1. bambidee

    bambidee Active Member

    Joined:
    Jun 12, 2011
    Messages:
    453
    Likes Received:
    74
    Location:
    upstate n/y
    like it or not post #300, (i guess i should have called and asked) Sorry to open the door and P/O people of but ? I have had things not gone as planed but I do not want to point the finger in another direction. In the moment when we want to hear the rumble the choice is sometimes made , done it myself. accept the bad motor grinch had a good laugh at our expense.
  2. cardboard

    cardboard Well-Known Member

    Joined:
    Nov 12, 2007
    Messages:
    11,459
    Likes Received:
    56
    Location:
    Lake Livingston, Tx.
    Hayden said to run the M6 till it wears the chain into the shoe.
    The extra wear will give it more room for slack in the chain.
    Only thing is it put so much pressure on the chain that it burn't my compensator sprocket up.
    He was also stating that he had them with good success on bikes everywhere .
    Told him a lot of people put them on and with the chain so tight got scared and took the off.
    And one of his dealers that sold it to me. Said don't put it in unless you can get 3/8" on the measurement.

    Getting him to get a bike just like mine and put the tensioner in it and see if he can get the chain to move with the M6 in it.
    I couldn't.

    He said HD has like 6 different part numbers for the auto adjusting tensioners.
    Then he should have different shoes for each of them.

    I already had problems with it and would not put it back in.

    Too much pressure not he Output shafts.
  3. hotroadking

    hotroadking Super Moderator Staff Member

    Joined:
    Jun 16, 2004
    Messages:
    13,682
    Likes Received:
    584
    Location:
    Mouseville USA
    so is he going to buy it back or do you have a paperweight..
  4. cardboard

    cardboard Well-Known Member

    Joined:
    Nov 12, 2007
    Messages:
    11,459
    Likes Received:
    56
    Location:
    Lake Livingston, Tx.
    He was trying to say HD has like 6 different part numbers for their bikes auto tensioners. And was Bla Bla Bla and I said to settle this.
    Since you are in California and I'm inn Texas
    To go and get a 2011 Ultra Limited and put the M6 BT07 in the bike and see if if don't take all the slack out of the primary chain just like it did on mine.
    He said give him time to do it and he would get back with me.
    I don't care. I ain't putting it back in.
    Like I said , Asked Tech support with Fuelmoto if they ever tried them.

    They said , no.
  5. hotroadking

    hotroadking Super Moderator Staff Member

    Joined:
    Jun 16, 2004
    Messages:
    13,682
    Likes Received:
    584
    Location:
    Mouseville USA
    I would imagine that HD's move to the adjustable tensioner
    has killed off a lot of his business, there were a couple of companies
    doing this in the 90's and early 00's before the HD auto tensioner
    came with the bike....

    SO he's limited to selling to older bike crowd... or fixing a problem
    that doesn't really exist...
  6. FLHTbiker

    FLHTbiker Moderator Staff Member

    Joined:
    Nov 3, 2004
    Messages:
    18,516
    Likes Received:
    252
    Location:
    Oregon
    Could be stuck with a paper weight CB, hope not but could happen.
  7. cardboard

    cardboard Well-Known Member

    Joined:
    Nov 12, 2007
    Messages:
    11,459
    Likes Received:
    56
    Location:
    Lake Livingston, Tx.
    As long as the output bearing on my bike are O.K.
    I don't care if I have a paper weight.
    Won't be the 1st time i've bought something I didn't like.
    That is the least of my worries.
  8. FLHTbiker

    FLHTbiker Moderator Staff Member

    Joined:
    Nov 3, 2004
    Messages:
    18,516
    Likes Received:
    252
    Location:
    Oregon
    I think we've all been there a few times. I know I have.
  9. bambidee

    bambidee Active Member

    Joined:
    Jun 12, 2011
    Messages:
    453
    Likes Received:
    74
    Location:
    upstate n/y
    glad to hear that the end result is in view with good results. i also have some (paperweights) here . i still have not pulled the jugs on my 2000 road king that developed some oil consumption and detonation issues, looked at the calendar and said oh cr-- time is actually betting short. will post some more info on that thread soon.
  10. cardboard

    cardboard Well-Known Member

    Joined:
    Nov 12, 2007
    Messages:
    11,459
    Likes Received:
    56
    Location:
    Lake Livingston, Tx.
    Just need for some of the cold weather & clouds to leave. And give me a little more riding time. Gonna go down to 22* tonite. Suppose to be the last cold day for a week.
    Rode Sunday put over 150 miles on the bike. WAs a little cool.
    But all in all a great day to ride.
  11. kenfuzed

    kenfuzed Administrator Staff Member

    Joined:
    Jan 1, 2005
    Messages:
    10,512
    Likes Received:
    140
    Location:
    Las Vegas NV
    I have a Hayden M6 BT07 new in the box that I've never gotten around to installing on my 08. After switching the primary fluid to ATF my neutral and shifts improved so it wasn't a priority to install it.

    Glad you caught this before the damage became any worse.
  12. joshbob

    joshbob Well-Known Member

    Joined:
    Nov 19, 2010
    Messages:
    5,687
    Likes Received:
    167
    Location:
    Hobgood, N.C.
    Woke up to zero this morning (weather guy says 2 degrees). Broke the record set in '77. No riding here for a while.
  13. bambidee

    bambidee Active Member

    Joined:
    Jun 12, 2011
    Messages:
    453
    Likes Received:
    74
    Location:
    upstate n/y
    i look at the crazy weather across the country and hope we look back for many years to come and say" yeah but remember 2013
  14. FLHTbiker

    FLHTbiker Moderator Staff Member

    Joined:
    Nov 3, 2004
    Messages:
    18,516
    Likes Received:
    252
    Location:
    Oregon
    Glad to hear your back on the road CB and I agree with Ken, glad you caught it before your whole engine went south.
    As for the weather we are supposed to get a bit of snow next week just when I need to be on the bike with the HOG chapter Road Captain team.
  15. joshbob

    joshbob Well-Known Member

    Joined:
    Nov 19, 2010
    Messages:
    5,687
    Likes Received:
    167
    Location:
    Hobgood, N.C.
    I hope everybody will be up and riding again soon. This is the worst weather (for N.C.) that I have seen and in many other parts of the country as well. Can hardly wait so I can test ride all the new stuff I did to the bike.
  16. FLHTbiker

    FLHTbiker Moderator Staff Member

    Joined:
    Nov 3, 2004
    Messages:
    18,516
    Likes Received:
    252
    Location:
    Oregon
    Thinking of riding the route for the first leg of the Road Captains ride today. Its sunny and not to cold.
  17. hotroadking

    hotroadking Super Moderator Staff Member

    Joined:
    Jun 16, 2004
    Messages:
    13,682
    Likes Received:
    584
    Location:
    Mouseville USA
    Going to be in the 80's this weekend hope to get out and ride some...
  18. joshbob

    joshbob Well-Known Member

    Joined:
    Nov 19, 2010
    Messages:
    5,687
    Likes Received:
    167
    Location:
    Hobgood, N.C.
    Shame on you if you don't LOL.
  19. hotroadking

    hotroadking Super Moderator Staff Member

    Joined:
    Jun 16, 2004
    Messages:
    13,682
    Likes Received:
    584
    Location:
    Mouseville USA
    well there's shidt that has to be done...
  20. joshbob

    joshbob Well-Known Member

    Joined:
    Nov 19, 2010
    Messages:
    5,687
    Likes Received:
    167
    Location:
    Hobgood, N.C.
    I hear ya. By Sunday it's gonna be in the mid 60s here. Probably all the snow will be melted by then, but still can't ride yet - grrr.

Share This Page