1. After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
  2. Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.

    There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.

Another Lift Table Question

Discussion in 'Motorcycle Tech Talk' started by JohnnyBiker, Jul 11, 2013.

  1. cardboard

    cardboard Well-Known Member

    Joined:
    Nov 12, 2007
    Messages:
    11,459
    Likes Received:
    56
    Location:
    Lake Livingston, Tx.
    Is the stop down.
    Raise the table, look on the right back side, kick the safety stop up.
  2. JohnnyBiker

    JohnnyBiker Well-Known Member

    Joined:
    Mar 25, 2010
    Messages:
    9,568
    Likes Received:
    205
    Location:
    Minnesota
    huh?
  3. cowboy

    cowboy Moderator Staff Member

    Joined:
    Apr 19, 2006
    Messages:
    9,926
    Likes Received:
    50
    Location:
    Alvin TX
    JB there should be a safety latch on the base somewhere , lift the table about a 1/2 in & release it then she'll go down :cool:
  4. cardboard

    cardboard Well-Known Member

    Joined:
    Nov 12, 2007
    Messages:
    11,459
    Likes Received:
    56
    Location:
    Lake Livingston, Tx.
  5. JohnnyBiker

    JohnnyBiker Well-Known Member

    Joined:
    Mar 25, 2010
    Messages:
    9,568
    Likes Received:
    205
    Location:
    Minnesota
  6. cardboard

    cardboard Well-Known Member

    Joined:
    Nov 12, 2007
    Messages:
    11,459
    Likes Received:
    56
    Location:
    Lake Livingston, Tx.
    No !
  7. cardboard

    cardboard Well-Known Member

    Joined:
    Nov 12, 2007
    Messages:
    11,459
    Likes Received:
    56
    Location:
    Lake Livingston, Tx.
    Make sure there is nothing under the wheels that rolls across the floor too.
  8. JohnnyBiker

    JohnnyBiker Well-Known Member

    Joined:
    Mar 25, 2010
    Messages:
    9,568
    Likes Received:
    205
    Location:
    Minnesota
    Then there is something wrong. My lift does not want to lower and my lift doesn't lift very smoothly.
  9. cardboard

    cardboard Well-Known Member

    Joined:
    Nov 12, 2007
    Messages:
    11,459
    Likes Received:
    56
    Location:
    Lake Livingston, Tx.
    When you press the foot pedal down. Press it till the back side of the pedal is all way down on the floor.
    If that don't work try standing on it.
    Mine goes down by itself.
    The roller wheels are ob the front side. If something gits infer them thy can't roll .
    I've never had a problem with my table.
    Hope you didn't git Teflon tape on the air ports when you put the air connectors on.
  10. cardboard

    cardboard Well-Known Member

    Joined:
    Nov 12, 2007
    Messages:
    11,459
    Likes Received:
    56
    Location:
    Lake Livingston, Tx.
    Look at the rollers on the sides of the lift.
    How much air pressure do you have.
    Mine is at least 90 lbs on the guage of the compressor.
  11. cardboard

    cardboard Well-Known Member

    Joined:
    Nov 12, 2007
    Messages:
    11,459
    Likes Received:
    56
    Location:
    Lake Livingston, Tx.
    What did you come up with.
    Did you take anybody over that knows about a lift or have you called TCML.

    I have never seen a problem like you are having.
  12. hotroadking

    hotroadking Super Moderator Staff Member

    Joined:
    Jun 16, 2004
    Messages:
    13,682
    Likes Received:
    584
    Location:
    Mouseville USA
    Either not getting air or not enough air
    is their a lever on the compressor that stops air going through the hose
    most have one, a manual shut off..
  13. cardboard

    cardboard Well-Known Member

    Joined:
    Nov 12, 2007
    Messages:
    11,459
    Likes Received:
    56
    Location:
    Lake Livingston, Tx.
    He said it would not lower.
  14. hotroadking

    hotroadking Super Moderator Staff Member

    Joined:
    Jun 16, 2004
    Messages:
    13,682
    Likes Received:
    584
    Location:
    Mouseville USA
    Doesn't it have to slightly lift to lower

    he also said it lifts very slow

    which would be low pressure from the compressor
    or perhaps a safety valve on the ram or lift ram is bad
    or the floor pedal is bad...

    Or he's hooked something up wrong...
  15. cardboard

    cardboard Well-Known Member

    Joined:
    Nov 12, 2007
    Messages:
    11,459
    Likes Received:
    56
    Location:
    Lake Livingston, Tx.
    He has a small 30 gallon compressor.
    I was tryin to git him to git a 60 gallon tank. It's gonna raise slowly.

    Know several folks with this lift.
    Never heard of. Problem

    It's a brand new lift.

    Couldn't imagine what the problem is.:rolleyes:
  16. hotroadking

    hotroadking Super Moderator Staff Member

    Joined:
    Jun 16, 2004
    Messages:
    13,682
    Likes Received:
    584
    Location:
    Mouseville USA
    Might be an under spec compressor what does that lift call for
    they have them here at daytona every year... Big lift, heavy gonna
    take some air to move it...
  17. JohnnyBiker

    JohnnyBiker Well-Known Member

    Joined:
    Mar 25, 2010
    Messages:
    9,568
    Likes Received:
    205
    Location:
    Minnesota
    Lift is good, compressor is competent, just needed some weight.;)
  18. cardboard

    cardboard Well-Known Member

    Joined:
    Nov 12, 2007
    Messages:
    11,459
    Likes Received:
    56
    Location:
    Lake Livingston, Tx.
    Will it even lift that Big heavy Ass bike of yers ?
  19. FLHTbiker

    FLHTbiker Moderator Staff Member

    Joined:
    Nov 3, 2004
    Messages:
    18,516
    Likes Received:
    252
    Location:
    Oregon
    :) One of those V-8 moments
  20. joshbob

    joshbob Well-Known Member

    Joined:
    Nov 19, 2010
    Messages:
    5,687
    Likes Received:
    167
    Location:
    Hobgood, N.C.
    Well, it's working. I thought you put it together wrong LOL.

Share This Page