1. Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.

    There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.

Daytona Twin Tech TC88A info and confirmation of issues please

Discussion in 'EFI Maps and Tuners' started by NeilP, Dec 8, 2019.

  1. NeilP

    NeilP Active Member

    Joined:
    Nov 17, 2009
    Messages:
    342
    Likes Received:
    4
    Location:
    Jersey, Channel Islands
    Is there any one here that is knowledgable on the use of and difference between settings and the software that goes with the Daytona Twin Tech TC88A ignition?


    I have a question that has come up after an upgrade on my bike, headwork and 1275 cc Hammer barrel and piston kit, followed by Dyno tonging and adjusting the dials on the TC88A

    The guy that did the build, a really nice chap, so I don't want to insult him by directly telling him he has got it wrong, (if he has) , but I am sure he has some wrong assumptions about how the TC88A works in relation to EEPROM or default FLASH table, switching between the two and how the software achieves the switch.

    I will not go in to more detail now, wasting all your time reading the detail , unless some one replies that knows how to operate the PC-Link software that interfaces with the TC88A.

    I have attached the table file as I downloaded from the bike the day I got back to my home

    Attached Files:

  2. hotroadking

    hotroadking Super Moderator Staff Member

    Joined:
    Jun 16, 2004
    Messages:
    13,548
    Likes Received:
    539
    Location:
    Mouseville USA
  3. NeilP

    NeilP Active Member

    Joined:
    Nov 17, 2009
    Messages:
    342
    Likes Received:
    4
    Location:
    Jersey, Channel Islands
    Thanks,
    Yes I have browsed the site, got the manuals etc , even had a chat with their support, but they tend to answer what they think you have asked, rather than a straight answer to the exact question. If only the were able to answer a straight question with a ‘yes’ ‘no’. Or ‘sorry I don’t know’.
    hence this post
    I have situation with settings on my bike, done by a nice chap, but I have feeling he does not understand the software properly
  4. NeilP

    NeilP Active Member

    Joined:
    Nov 17, 2009
    Messages:
    342
    Likes Received:
    4
    Location:
    Jersey, Channel Islands
    OK, so the question is.


    Can you change from FLASH Advace Table ( the default tables) to EEPROM (Custom ) Advance table and back again , WITHOUT doing a /Download, change setting / Upload.

Share This Page