1. After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
  2. Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.

    There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.

Need help- how to thighten passing lamps on HD

Discussion in 'Motorcycle Tech Talk' started by EPS, Jul 23, 2006.

  1. cardboard

    cardboard Well-Known Member

    Joined:
    Nov 12, 2007
    Messages:
    11,459
    Likes Received:
    56
    Location:
    Lake Livingston, Tx.
    Talked to the dude in the parts dept of the Harley shop about a plug or something to keep my low beam on when I out my high beam on.
    He said he had a plug that was about 30.00 or so.
    Asked him where you used it at.
    He said he wasn't for sure.
  2. FLHTbiker

    FLHTbiker Moderator Staff Member

    Joined:
    Nov 3, 2004
    Messages:
    18,516
    Likes Received:
    252
    Location:
    Oregon
  3. cardboard

    cardboard Well-Known Member

    Joined:
    Nov 12, 2007
    Messages:
    11,459
    Likes Received:
    56
    Location:
    Lake Livingston, Tx.
    Thanks

    Where does it plug in behind the headlight & wiring harness?
  4. FLHTbiker

    FLHTbiker Moderator Staff Member

    Joined:
    Nov 3, 2004
    Messages:
    18,516
    Likes Received:
    252
    Location:
    Oregon
    You'll have to read the directions but have a feeling that you have to pull the small console down by the ignition switch. That's where I had to got to splice the wires and know that's were those wiring harness is likely located.

Share This Page