1. After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
  2. Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.

    There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.
Bike Talk Motorcycle Forum is For Sale Welcome to Bike Talk

Slide question

Discussion in 'CV Performance' started by marktm200, Apr 21, 2012.

  1. marktm200

    marktm200 New Member

    Joined:
    Apr 21, 2012
    Messages:
    1
    Likes Received:
    0
    I installed my new tuners kit and the bike ran good but someone had already drilled out the hole in my slide larger than the supplied drill bit. like i said it ran good and didnt notice anyissues what problems might this cause? thanks
    marktm200, Apr 21, 2012
    #1
  3. kenfuzed

    kenfuzed Administrator Staff Member

    Joined:
    Jan 1, 2005
    Messages:
    10,512
    Likes Received:
    140
    Location:
    Las Vegas NV
    The biggest issues known to occur with an over drilled slide is erratic idle or surging at very light throttle (cruising). Some are lucky and don't experience any problems at all, however if you have similar trouble it is recommended to replace the slide.
    kenfuzed, Apr 21, 2012
    #2

Share This Page

XenPorta © Jason Axelrod from 8WAYRUN.COM