-
After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
-
Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.
There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.
Bike Talk motorcycle forum
«
»
Sep
05
They have part numbers for the 07's up on their website. These are for the 07' models with 02 bungs. Any idea when they'll be available through Direct Parts for sale? Set to release this November through V&H, so wondering if same time frame and if got a line on prices, ship dates, etc yet?
Sep
03
Ijust read about John Hanna's front tire cupping,
On my 01 heritage my front tire is wearing fine,but at 40 mph only when im out of the throttle i feel the front end bounce not a wobble but up and down,my spokes are good,my tire pressure is correct,my wheel is not bent,any ideas
On my 01 heritage my front tire is wearing fine,but at 40 mph only when im out of the throttle i feel the front end bounce not a wobble but up and down,my spokes are good,my tire pressure is correct,my wheel is not bent,any ideas
Sep
02
Got 05 Fatboy carb
Planning on slapping Santee Jim Nasi Custom "Cheatin Death" exhaust on it - anyone have any experience with the sound or compatibility w/ bike?? Tough finding info while currently overseas.
Read this websites articles about lowering bike. Wanting to lower rear 2" - didnt think about front along with it? Rider weight 190 and if dual 310. Any feedback/lessons? Appreciate it.
Planning on slapping Santee Jim Nasi Custom "Cheatin Death" exhaust on it - anyone have any experience with the sound or compatibility w/ bike?? Tough finding info while currently overseas.
Read this websites articles about lowering bike. Wanting to lower rear 2" - didnt think about front along with it? Rider weight 190 and if dual 310. Any feedback/lessons? Appreciate it.
Sep
02
Have you seen the new 07 Screaming Eagle Ultra? Got my first look at one the other day, black with the Orange. Nice looking bike. 110 inch motor or 1800CC as the metric bikers call it. Has 115 torque at the crank, but still not bad. Comes with the touring mufflers so a little quiet but not to bad if you like the music. The bike comes with more built in do dads than most cars do. Heated seats and grips, good for Canada weather hey, Bob.
Sales manager said $34500.00 out the door for you. Would be nice but a lot of money. But then you take a stock Ultra and put everything into it that this one has and you may exceed that. Nice looking bike though and that 110 inch motor should get up and move out pretty good.
Sales manager said $34500.00 out the door for you. Would be nice but a lot of money. But then you take a stock Ultra and put everything into it that this one has and you may exceed that. Nice looking bike though and that 110 inch motor should get up and move out pretty good.
Sep
01
I just noticed cupping on my stock Dunlop Front Tire, bike is 2005 FLHTCUI.
The wear is uniform on left and right side of tire where the tread side bars come toward center tread of tire. Wear is around the complete circumference of the tire. I monitor air pressure constantly and it is kept at 36 psi. I have 21,000 miles on the tire. The front Dunlops on my bikes usually will out last three rear tires before replacement. This is an original tire that came on the bike and was balanced at the factory. Any feedback would be appreciated.
Thanks, John
The wear is uniform on left and right side of tire where the tread side bars come toward center tread of tire. Wear is around the complete circumference of the tire. I monitor air pressure constantly and it is kept at 36 psi. I have 21,000 miles on the tire. The front Dunlops on my bikes usually will out last three rear tires before replacement. This is an original tire that came on the bike and was balanced at the factory. Any feedback would be appreciated.
Thanks, John
Page 1941 of 2361
XenPorta
© Jason Axelrod from 8WAYRUN.COM