Bike Talk motorcycle forum

What causes motor oil (significant quantity) to come through the breather when the engine is running. Earnestine is a 89 ultra with stock carburator. Oil seem to be coming to the breather from a vent in crankcase.

does anyone know what the fuel pressure spec is on a fuel injected 2003 heritage softail?

I have Rinehart True Duels and the plug in the O2 sensor came out on the way home. Does anyone know what size bolt goes in the bung?

Thanks

Dino

I've got a 78XL the starter whins like its winding up then it fires.Its got a new hitachi type 1.4kw allballs starter.I replaced the starter shaft,needle bearings on both ends and new thrust washers.Shes got a new Yuasa YHD-12 28 amp hr battery.What next

I recently rebuilt my zenith carburetor on my 1977 lowrider. Everthing went fine with the rebuild kit, no problems. However there is a small vent hole on the body of the carburetor, just above the bowl, right by the throttle linkage. I keep getting gas leaking out of that vent. Its a small amount but still, it should be leaking out and it wasn't doing it before.

I set the float with a 3/16" drill as directed. So I don't think that is the problem. I've taken the carb apart a few times to see if I missed something. Not sure what to do? Is this vent suppossed to be plugged with something?