Bike Talk motorcycle forum

I have 96 Heritage that seems like it never gets enough attention because it is always something. Anyhow, when I bought the bike last year I was given a list of all the high performance things that had been done to the bike which is what intrigued me to go with it. Now in hind sight it may not have been the best thing for me to do. Well of the HP items on it was a BDL enclosed belt drive. I personally can not tell the difference in performance between chain and belt. The problem I have not is that the belt is loose. The shop I took it to wants to charge me $1500-$2000 to fix it . I was told that the clutch hub splines and the main drive splines are worn. The remedy from the shop was to rebuild the tranny and replace the hub. My question for any one is how good is BDL products and...

Has anyone installed Feuling oil pump and lifters in their twin cam ? I installed the pump and lifters a while back. There were no instructions concerning valve lash settings with the parts. I tried calling Feulings phone number but got a recording saying their number had been disconnected. I later read some stuff on the internet that the company was being sold. Anyway, does anyone know what the recommended valve lash setting is for their lifters. Any help is appreciated.

Lowglide

I have a Custom 1999 Fatboy with a leaking fuel runoff tube. I run the bike with the fuel off until it quits but it still drains fuel. I do not have vented caps on it and am going to replace those. Fuel tank is not full. Help?

Hi guys, please bare with me as I am new to all of this.Proud owner of an 04 Road Glide,dealer installed SE air filter,chip/download & touring mufflers.My question is, I purchased V&H True Duels and using my mufflers I installed them myself,new gaskets and seemed to go pretty well until i started it up, the 1st few times only for a few minutes. Worked on a few other things then decided to run it for a while cause it was sitting for a week or 2. About 8 to 10 minutes into this i noticed the head pipes where it bolts to the engine where Glowing Red Hot like a torch was on it.Does anyone know why this happen?And should I be worried about any kind of damage?The Bike seemed to run ok.
Any help would be much appreciated

I've been persuaded to install ThunderHeader pipes on my scooter. I just want to know if anyone else has these pipes and what their feedback is before I order 'em.

Thanks