Bike Talk motorcycle forum

Whats the largest tire size for rear 1988 fxst with belt and 16 x3" rim??????

hey guys,

working on the harley this weekend,i found some troubling stuff to me.
clutch has'nt been workin right for a while,neutrel has been hard to find,and just hard to shift. so i took off my derby cover to tae a look see, what i found was a broken bolt, 1 of the 4 bolts that go through the ajuster plate snapped.so i pulled the other 3 out,and the cluth pack came off in my hand. so i pulled the outer primary to get a better look and to remove the cluth pack,and ajuster plate. after that what i found was 4 broken spacer knobs, that come off the inner hub or at least i thought they were spacers,but what it really looks like is they were connected to the inner hub,but all 4 broke off smooth. "and chuck i have been using the manual, i have come to the conclusion i just cant read"
so...

anyone have an idea where to get a coil cover for a twinfire coil ??I had to grind my stock cover up pretty good to make it fit and ofcourse the damn thing rusted up afyer a couple of years because of the crome that was removed! its for my old trustworthy"for the most part!" 91 fatboy!

I am considering the rinehart true dual exhaust, my question is what do I have to do or have done (if anything) other than bolt them up?
Motor is 96" with screamin eagle air intake and the screaming eagle stage 1 race kit tuner
what do I need to check after install? Thanks for the info

Stock 80" EVO. CV carb with thunderslide kit. Just installed a Kuryakyn 9990 Hypercharger. When I really romp on it I get gas in the Hypercharger. Pulled the trapdoor and reved it up a couple of times. Jet is pointed into the carb throat. Good spray patern. Can anyone tell me whats going worng?