Bike Talk motorcycle forum

Some woodchuck as*hat f@c*tard hit my truck (2013 Dodge ram 1500 Quad cab)yesterday on the way to work. At 3:30p.m. was heading down the one lane in town that splits to two lanes under the over pass to get on the interstate and some tool bag driving a beater dump truck pulling a trailer driving at a high speed swerved from far right to get in the same lane I was. I manuever was as the road is set up. He was driving his set up like he had a masseratti.. I seen him just enough to pull out of the way but the wide rear trailer tire fender caught the bumper fender gf my truck. Its a high traffic area and he had no license plate on his trailer which blocked the license on his truck. Because of the traffic I could not get the plate because of course he didn't stop and other cars...

I have been looking for a cabinet that I can hang in my trailer to store various items that are needed during transport like tie downs, helmet, assorted tools etc. Fabrication is not my strong point. Is anyone aware of a place that makes these and for a reasonable price? I am not looking for A1 quality but not junk either. Thanks.

So far switching engine cases and rocker boxes with another guy has been a learning experience. In 06, Harley increased the shifter shaft diameter, making the primary case no longer an easy remove and reinstall. In my latest problem, I have found the parts catalogue shows 07 and later rocker boxes as a different part# than the 06 and down. I know on 07 fuel injection came out, and now there is a CH temp sensor on the head,but what differences in the rocker boxes could there be? Oiling passages look the same and valvetrain geometry is same from what I have read.
I was told by one Harley tech that the difference was the design of the breather system, was this EPA related? Visually all looks like an easy swap, but I think the oil breather in the lower rocker boxes has a lower height than...

How long do you let your bike warm up before you ride, especially in cold weather?