-
After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
-
Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.
There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.
Bike Talk motorcycle forum
«
»
Mar
01
Has anybody here installed the WildOne 560 drag bars onto their Fboy? I just purchased it and was wondering if anybody had any comments about them; like confort, reach, and what you had to do to make all cables, wires, brake line work? Thanks in advance.
Feb
28
How can i conect my tomtom rider gps to the sound system on my 94 Ultra??
There is an xtra (not in use) contact back on the radio,what can this been used for??

There is an xtra (not in use) contact back on the radio,what can this been used for??

Feb
28
I am a first time Harley owner and I would like to put new pipes on to the bike. I have a 2005 Dyna Super Glide with EFI. I am planning to use Vance & Hines Big Shot Staggered pipes ,a Power Commander and aScreaming Eagle hi flo air cleaner. Has anyone used this combination before if so is it good or bad. Also I am going to install myself , is there anything I should be aware of ?
Feb
27
Feb
27
I recieved a free copy of the April American Rider magazine, in there parts section. The article is named Why the 2006 Dyna's tell the future. It goe's on to say that these changes were made for Riliability reasons. The changes are as follows:
1- The oil filter housing and the and the integral right side of the crank case oil passages have been changed.
2- The inner primary mounting bolt patternhas been changed and the sprocket has been changed fom 10 splines to 24 splines.
3- The outter cam drive chain has been replaced with a roller chainand hydraulic tensionerswhich minimizes chain slack.
4- The inner cam drive chain has also been replaced with a roller chain and hydralic chain tensioners.
5- The new cam mounting plate supports are made from a new grade aluminum...
1- The oil filter housing and the and the integral right side of the crank case oil passages have been changed.
2- The inner primary mounting bolt patternhas been changed and the sprocket has been changed fom 10 splines to 24 splines.
3- The outter cam drive chain has been replaced with a roller chainand hydraulic tensionerswhich minimizes chain slack.
4- The inner cam drive chain has also been replaced with a roller chain and hydralic chain tensioners.
5- The new cam mounting plate supports are made from a new grade aluminum...
Page 2037 of 2361
XenPorta
© Jason Axelrod from 8WAYRUN.COM