-
After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
-
Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.
There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.
Bike Talk motorcycle forum
«
»
Jun
03
I would like to convert my 77 FX to a wide tire, does anyone know what the max size tire could be put on safely and would I neeed to change the tranny from a 4 speed to anything else.

Jun
03
Harley is advertising new parts and accessories, and one of these is an oil cooler. Has anyone installed one of these yet ? Is it worth it ?
I have been reading a lot of articles about Synthetic oils, temperature, wear, etc, etc. Surely this cooler would also help ?
Any ideas.
Cheers
I have been reading a lot of articles about Synthetic oils, temperature, wear, etc, etc. Surely this cooler would also help ?
Any ideas.
Cheers
Jun
02
A question about my (64903-99) SE discontinued mufflers.
There are three outlet holes on each slipon.
Two are 1 and 1/2 inches in diameter and one is a 3/8 inch hole.
Do other mufflers have this many?
Would this type of muffler lack the back pressure I need for optimal performance from an 88 cid?
I have a 2005 Ultra 1450 with SE Air Filter Kit and have had it dyno tuned with a SE Race Tuner.
I noticed a fall in low end torque when these were installed.
It did get a little better after the dyno though.
I am still running the stock crossover headpipes.
Runs OK in the upper RPM range but just lacks that low end torque.
I am thinking about switching to Rush mufflers since the baffles can be changed out to my level of sound preference.
Anybody running these mufflers? How do...
There are three outlet holes on each slipon.
Two are 1 and 1/2 inches in diameter and one is a 3/8 inch hole.
Do other mufflers have this many?
Would this type of muffler lack the back pressure I need for optimal performance from an 88 cid?
I have a 2005 Ultra 1450 with SE Air Filter Kit and have had it dyno tuned with a SE Race Tuner.
I noticed a fall in low end torque when these were installed.
It did get a little better after the dyno though.
I am still running the stock crossover headpipes.
Runs OK in the upper RPM range but just lacks that low end torque.
I am thinking about switching to Rush mufflers since the baffles can be changed out to my level of sound preference.
Anybody running these mufflers? How do...
Jun
02
Hi!!!
My dad buy a sportster 883 07 EFI but he wanna convert to carb because we know repair and tune carbs, besides, the brazilian gasoline is very adultered (23% of ethanol plus solvents puts ilegaly on the gas).
Is possible to make this conversion?
Somebody here make this conversion or know how to make?
Thanks and sorry my english!!!
Glaucius
My dad buy a sportster 883 07 EFI but he wanna convert to carb because we know repair and tune carbs, besides, the brazilian gasoline is very adultered (23% of ethanol plus solvents puts ilegaly on the gas).
Is possible to make this conversion?
Somebody here make this conversion or know how to make?
Thanks and sorry my english!!!
Glaucius
Jun
01
Well, today at my daughters school, I read a huge poster made for one of the classes pen pals. It seems they were pals with an SFC Christopher R. Brevard. Well after reading the big board there, I realized he was killed in action. Damn, did that put a lump in my throat. My wife said she cried when she read it the other day and she couldn't read it again. I was tearing up as I continued to read all of the stuff on the board. I felt compelled to share it with you guys. I also signed the guest book at one of the sites for his family, to let them know how much I appreciated his sacrifice. Just was a wake up call to me, seeing a face instead of just a name, especially seeing as my daughters classmates were pen-pals with him.....
...

Page 1848 of 2361
XenPorta
© Jason Axelrod from 8WAYRUN.COM