Bike Talk motorcycle forum

i have a 98 ultra and the left turn signails dont work at times i checked all the bulbs is it a bad switch i would appreate any help

I found a crack in the bendix gear.I replaced it and now all my problems are history.4now.Thanks CD.

I have an 06 Dyna Street Bob. I installed the Python staggered duals and love the sound. I had the SE breather kit and stage 1 download completed about 1000 miles ago. I have been getting a frequent pop on deceleration. I checked the plugs last night and the electrodes are white. I am a little nervous of this bike running lean. I may try some baffles with a little more restriction than the straight through baffles it came with. I thought the purpose of the down load was to richen the mixture. Any suggestions or advice would be appreciated.

Thanks,

RL

I have a 2004 fatboy....if I were to put on "Lindy engine guards" would the brake pedal and gear shifter make it uncomfortable to use the top of the Lindy to stretch out...

Thanks a million

HarleyCPA

A recently occurring problem. I started the bike this morning FXSTB, and the High Beam indicator was on, I reved the motor up to idle speed and locked the throttle to let it warm up. The High beam indicator went off and my headlight turned on, didn't notice it was off before. During my ride to and from work the high beam indicator would come on sometimes and then go out as I increased RRM's. Whenever the headlight is not lit the highbeam indicator comes on. Switched the bulb in the headlight, did the same thing. Checked the owners manual to see if that is a built in indicator that you headlight is not operational, couldn't find anything. Checked the wiring everything looks good. Anyone have an idea on 1. why the light is not operating all the time, 2. Why when the headlight is not...