-
After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
-
Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.
There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.
Bike Talk motorcycle forum
«
»
Jun
23
I need to replace one of the wires going to the fuse box on my Softail however I'm unable to get the clip that goes through the back of the box out to remove the wire. Is there some trick or tool I don't know about to get these things out?
Jun
22
Good morning everyone,Could someone please tell me the proper step by step
procedure to adjusting an S&S Super E ? Or inform me of a WEB site where
I might be able to print off some insite.The carb is on a 1989 Heritage.
The Bike starts fine but when I give it a shot of throttle it blows fire out both exhaust pipes. The plugs are sooty black.Could this be a leaky intake or just a miner carb adjustment? thanks, Bernie
procedure to adjusting an S&S Super E ? Or inform me of a WEB site where
I might be able to print off some insite.The carb is on a 1989 Heritage.
The Bike starts fine but when I give it a shot of throttle it blows fire out both exhaust pipes. The plugs are sooty black.Could this be a leaky intake or just a miner carb adjustment? thanks, Bernie
Jun
20
Just got back from Laconia - bad weather, great people. The state is looking to mandate ethanol-based fuels (using corn, etc.) in the next few years, like they do in South Dakota and other states. I remember some years ago seeing warnings that fuels with ethanol-type additives can eat the rubber seals out of some carburetors. When we went to Sturgis in 1998, I was ****ed careful not to use anything but name brand 93 octane in the bike, however that may not be an option in the future. Has anyone had any experience with these types of fuel in a carbureted bike motor?
Jun
19
bought a dayna dual fire ignition for my 1975 shovelhead the question i have is what should the plugs be gapped at also someone said i should have a different coil what should the coil resistance be and how can i check it?
Jun
18
I have a '92 Heritage, I'm getting some oil blow back at my oil tank around the oil cap/ dip-stick. It's a crank case breather and has the original air cleaner assembly (the head breather holes are sealed with solid bolts), sometimes when it sits a while it will pump oil out the case hose to the air cleaner back plate. I'm wondering if I have a crankcase vent problem, since I just had the top-end off and have new piston rings. All the aftermarket venting systems I've seen are for '93 and newer. Any help will be greatly appreciated!
Is there a PCV valve on my bike somewhere?
Is there a PCV valve on my bike somewhere?
Page 2154 of 2361
XenPorta
© Jason Axelrod from 8WAYRUN.COM