Bike Talk motorcycle forum

HI, I have a 2004 2004 EG and just installed the stage 1 (air cleaner, V&H ovals, Paower commander). But need help with the mapping, I'm using M807-010 from the disk that came with the PC. Is this the right one for this setup?

Seems there should be one for the V&H ovals, but I can't find one on the disk or web site.

Also just wanted to say that I ordered the parts from DP and was pleased with the quick response.

Thanks

My friend has an HD (don't know model). The starter solenoid does not release and the starter continues to crank after the starter button is released. Engine has been disable to prevent it starting during maintenance. Have to disconect the battery to stop cranking!!!!
New solenoid installed same thing.
While working on problem found that if the solenoid mounting bolts were loose to that solenoid could move a little then all worked OK.
Any and all help would be appreciated
Fred

Hi this is my first post.
My friend has a HD (don't know model). The starter solenoid does not release and the start continues cranking after the start button is released.
If the solenoid mounting bolts are loosened! so that it can be moved a little by hand, then the all function OK.
Any and all help would be appreciated.

Fred

Want to replace pipes on my '04 Super Glide. I want to hear my bike but do not want to be blasted away by extremely obnoxious noise. Am very confused because of the many different ones available. Any suggestions and/or advice would be appreciated.

looks like the long shots, which is the look i want, are good for softails but not for springer softails, is there a set of pipes out there that are like the vance and hines long shots that fit springers? I want the billet look not the veclocity look. suggestions?