-
After 20+ years it's time to pass the torch. If you are interested in acquiring this forum please contact support@cv-performance.com for details. Any spam will be reported and blocked.
-
Welcome to Bike Talk, a forum for all bikers and motorcycle enthusiasts. If you are new to Bike Talk, be sure to register for free and join the conversation.
There's always someone around willing to help out with questions or give a friendly wave back. All Harley and metric riders are welcome.
Bike Talk motorcycle forum
«
»
May
23
I admit it, I hate crowds - and many people in general (hermitile, I guess - too many years learning others' secrets may have soured me on most of the human race). So you won't see me at Sturgis and I only go to Virginia City for Reno's Street Vibes. But I have grown fond of the Run-A-Mucca Motorcycle Rally in Winnemucca, NV. Probably the least glamorous rally in the country. It's this weekend, and it is my last ride for awhile as I am going under the knife (again -
) for some spine reinforcement (please spare me the "weak spine/spineless" jokes - I am a veteran and a veteran firefighter, and though it may be a bit worn out and a tad too crunched I have always at least HAD a spine
).
Anyway, I thought I'd give 'em a plug and let anyone that likes low-key, laid back,...


Anyway, I thought I'd give 'em a plug and let anyone that likes low-key, laid back,...
May
23
Looking at the 2 riders backrests that HD sells....one is 209 and is just a standard backrest. Second one is 300 and has the push button adjustment for "on the fly" adjustments...... anyone have any opinions on if the additional $$ is worth it for the adjustable one??? Only want to do this thing once!!! 

May
23
anybody going to the republic of texas rally next weekend in austin???
me an a few budies are gonna make the cruise, was just curious if anybody else was going?
TRG
me an a few budies are gonna make the cruise, was just curious if anybody else was going?
TRG
May
23
I'm gonna have my pipes off this weekend (finally got some 2 into 1's) .
My question has to do with cam tensioners. Since I will have the pipes off, I am thinking of pulling the cam cover and checking for wear. Looking at the manual, it seems like I will only be able to see the outer tensioners. Is this correct? Does the cam plate have to come off to see the inner shoe? I'm still under warranty till October and might just hold off for the summer.
I do hear some light rattling type noise up front on that side but 'not sure if it's normal and it doesn't sound too fatal. Plus it's only got 10k and i've already done 5 oil changes on it. Any advice would be appreciated.
My question has to do with cam tensioners. Since I will have the pipes off, I am thinking of pulling the cam cover and checking for wear. Looking at the manual, it seems like I will only be able to see the outer tensioners. Is this correct? Does the cam plate have to come off to see the inner shoe? I'm still under warranty till October and might just hold off for the summer.
I do hear some light rattling type noise up front on that side but 'not sure if it's normal and it doesn't sound too fatal. Plus it's only got 10k and i've already done 5 oil changes on it. Any advice would be appreciated.
May
22
I have a 2002 Sportster 1220 custom, and this morning I went to get it out and someone had knocked off my rear turn signal. I tried loosening up the bolt under the fender and retightening it, but no luck......can anyone help me here on getting this damn turn signal back on? I looked and it appears the bolt is bent a little bit, but shouldnt stop it from going back on
PLEASE HELP
Matt:angry:
PLEASE HELP
Matt:angry:
Page 1852 of 2361
XenPorta
© Jason Axelrod from 8WAYRUN.COM